Search models, users, collections, and posts
Legends Never Die_1
IP Report
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
8.8 h
1 plate
Open in Bambu Studio
Boost
4
6
0
0
8
1
Released
Description
Content has been automatically translated.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #15 (1.28mm) swap to Grey
At layer #22 (1.84mm) swap to White for the rest.
.
If you find my work pleasing kindly provide a LIKE and a FOLLOW I would be profoundly delighted
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)