Pull-Up Door Cage
Print Profile(1)
Description
A minimalist cage, featuring upper and lower sliding doors, measuring 80*80*100mm (excluding the handle). After printing, it can be directly press-fitted for assembly. Should concerns about loosening arise, super glue can be applied for secure bonding. Detailed assembly instructions are as follows:
1. After bending the enclosure 90 degrees, insert it into the base.
2. Insert the sliding door into the top cover, align the slider on the door with the groove on the enclosure, slide it in, and then snap the top cover into the enclosure.
3. Insert the door handle into the sliding door and tap it firmly into place with a tool. Assembly is complete.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (14)