TapeMaster - Masking tape applicator - Free 3D Print Model

Search models, users, collections, and posts

lindh3d

Tools>Hand Tools

IP Report

GIF

Print Profile(1)

All

A1 mini

X1 Carbon

H2D

X1E

P1P

P1S

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.20mm layer, 2 walls, 15% infill

Designer

4.6 h

2 plates

4.4(30)

Open in Bambu Studio

Boost

289

978

833

478

Released

Description

TapeMaster - Masking tape applicator

Meet the TapeMaster, your go-to 3D-printed buddy for hassle-free masking tape application! Designed for home painting projects, this clever tool works with any masking tape up to 30mm wide, helping you tape walls, trim, or furniture in a snap. It lays down tape smoothly and snugly, giving you clean, crisp paint lines without the usual mess or frustration.

Works with Any Tape: Fits standard rolls up to 30mm wide.
Perfect Application: A presses tape flat and tight
Quick-Cut Blade: Built-in cutter slices tape cleanly with a single press.
Easy to Hold: Lightweight, comfy grip makes taping a breeze.
DIY Printable: Whip it up at home with PLA or PETG in just

How It Works: Pop in your tape roll, glide the TapeMaster along your surface, and let the roller do the magic. When you’re done, hit the cutter for a perfect snip. No wrinkles, no fuss—just pro-level masking for your painting projects.

Boost Me (for free)

Dont forget to boost

Comment & Rating (39)

@cbmakertech

Print Profile

0.20mm layer, 2 walls, 15% infill

Excellent print on h2s

The profile uploader has replied

Show original

@lindh3d

Thank you for sharing your print ❤️

@inandwood

Print Profile

0.20mm layer, 2 walls, 15% infill

The back panel is quite weak

Show original

@lswi

Print Profile

0.20mm layer, 2 walls, 15% infill

perfect

@user_3365371659

Print Profile

0.20mm layer, 2 walls, 15% infill

printed fine but the back is slight hard to get off to replace the tap

@user_2634121850

i agree, the design of the rear wall must be changed

@user_1196412125

Basically good! Three suggestions to improve it. The lid is too thin, it breaks off easily, especially when you want to open it to replace a tape. Make it thicker and design the bar at the bottom with more play. Secondly, provide for a spring in the cutting device so that it doesn't wobble around constantly. Thirdly, the apparatus only works perfectly when 30mm tape is used! If it's narrower, it just wobbles back and forth and cannot be precisely adhered. A differential ring could help to keep the tape running straight. With these corrections, it is an apparatus that meets professional standards!

Show original

@Vipess

Boosted

Printed in PLA to test, loved it so much printed it again in petg for a permanent spot in my painting kit.

The designer has replied

@lindh3d

Im gald to here you like it 😊

@lindh3d

Wow nice to hear. im working on version 2 where you can have different width of tejp all from 15-40 mm

@YetAnotherDad

Print Profile

0.20mm layer, 2 walls, 15% infill

The printed model itself printed great without issues, but I have a hard time believing that this design was actually tested with tape that is less than 30mm instead of exactly 30mm even though the description claims it will work. Without any pieces bracing the tape to the edge, the tape will just wiggle around the extra space as it is rolling, so you won't get a straight line when taping. Also, the cutter worked for about a single roll of tape before wearing out. Should really be designed for using a metal blade. This was almost more of a hassle than it was worth. As others have suggested, I experienced the need for: - a springy tape cutter so the blade is not just wiggling around - a thicker side plate as the plastic cracks when opening it if you are not careful Overall, a great idea and a great start, but it needs some major improvements before I would recommend using this in the wild.

@user_825234969

Print Profile

0.20mm layer, 2 walls, 15% infill

the only thing is that the parts that I assume were created to cut the tape do not do so, otherwise the tape is fine for proper masking

Show original

@user_1077382755

Print Profile

0.20mm layer, 2 walls, 15% infill

parts didn't fit, back wall.was too thin broke trying to take it apart. waste of time and filament.

Strength Issue:back wall too thin

Other Issues:parts didn't fit.

@user_1196412125

Print Profile

0.20mm layer, 2 walls, 15% infill

Side wall too thin, therefore unstable. only works with 30mm bands, narrower and then you can't tape it straight. otherwise a good concept!

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

50mm Tape Dispenser Cutter

RestoreDoctor

15.5 k

5.9 k

Skadis Tape Measure Holder

Philipp.

10.3 k

2.1 k

Masky: Your little tape buddy

npopson

15.8 k

7.9 k

V for Vendetta Mask

Eagle_92

9 k

4.1 k