Predator Smile
Print Profile(0)
Description
Project: predator.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.33x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 3.36mm and the Actual Thickness is 2.83199mm
Filaments Used:
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#bf9b30 PLA Protopasta Good as Gold Transmission Distance: 5
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#8c9099 PLA PolyLite Grey Transmission Distance: 1
#e2dedb PLA PolyLite White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #11 (0.96mm) swap to Good as Gold
At layer #15 (1.28mm) swap to Blue Gray
At layer #20 (1.68mm) swap to Grey
At layer #23 (1.92mm) swap to White for the rest.
Boost Me (for free)
Thank you very much! If you boosted this model or another one from my collection, it means I’m one step closer to achieving my goal.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)