ADN Hueforge - Mauritian French

Project: DNA.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

You may print at higher layer heights below the Base Thickness of 1.28mm
The Max allowed Thickness is 3.2mm and the Actual Thickness is 3.2mm

Filaments Used:
    PLA BambuLab Basic Black  Transmission Distance: 0.6
    PLA BambuLab Basic Jade White  Transmission Distance: 5
    PLA BambuLab Basic Bambu Green  Transmission Distance: 2.8
    PLA BambuLab Basic Blue  Transmission Distance: 2.9
    PLA BambuLab Basic Red  Transmission Distance: 4
    PLA BambuLab Basic Yellow  Transmission Distance: 5.5
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #15 (1.28mm) swap to Jade White
    At layer #17 (1.44mm) swap to Bambu Green
    At layer #19 (1.6mm) swap to Black
    At layer #20 (1.68mm) swap to Blue
    At layer #23 (1.92mm) swap to Black
    At layer #24 (2mm) swap to Red
    At layer #28 (2.32mm) swap to Jade White
    At layer #29 (2.4mm) swap to Yellow
    At layer #33 (2.72mm) swap to Jade White for the rest.
 

Comment imprimer plus de 4 couleurs avec un seul AMS: à partir de 42sec sur la vidéo

How to print more than 4 colours with a single AMS: from 42 sec onwards in the video