Castrol TOM's JGTC Toyota Supra Race Car Model

Castrol TOM's JGTC Supra (#36 JZA80 – MKIV) Large Scale Model

Extending on my recently-loaded Toyota Supra Line-up in a smaller scale ( https://makerworld.com/en/models/1646284-toyota-supra-turbo-model-car-set-with-mods#profileId-1740049 )  and as an add-on the my other 200% Street Version of the supra  (https://makerworld.com/en/models/1646405-toyota-supra-turbo-large-scale-car-model#profileId-1740206) this is a dedicated upload for a larger, 200% scale version of the world famous Castom TOM's JGTC, championship-winning Supra! 

This started as a tail-end experiment as I was wrapping up the last of the 16 print profiles of the smaller set of supras and wanted to see how large I could push the p1s and x1c build envelope without splitting up the body. It was meant to be because I could literally get it right to 200%  of the original scale in a one-piece print! 

This model measures in at 300mm (11.8 in) length x 120mm (4.72 in ) width x 80mm (3.14 in ) height: Literally double the size of the smaller scale! 

Please note that you may also need to use a little glue on the wheel/tire depending on your material, as well as a littel dab under the exhaust before installing.

There are currently no brake rotor options for this setup due to the design of the wheel, I am actively looking into adding brakes like I did to my other 200% scale model. 

There is also only the single wheel option for this officially available, though I will note that the mounting is exactly the same so there is no reason you cannot use the SSR wheels from the other 200% scale model. 

Thank you for visiting my page and taking the time to print my models. Your support is truly appreciated. I never expected to have so many people following me and fueling my passion for creating the models that I create!