desk clock, with phone holder & pencil box R2D2

Be sure to visit my profile page to find more great models!
https://makerworld.com/en/@cP3D

I have made another clock here. Perhaps some of you will also like this clock.
I could imagine that this clock would also be a very nice gift for someone.

If you would like to enthuse others about these wall clocks, please share the link on social media.

Here you will only find the clock faces!
The necessary accessories can be found under the following link:

https://makerworld.com/en/models/1633272-clock-for-the-desk-with-phone-holder-pencil-box

To minimize print time without compromising quality, I have configured height range modifiers in my print profiles. So don't be surprised if the swap commands do not match the data in the print profile

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
 

Start with Black
At layer #12 (1.04mm) swap to Gray
At layer #18 (1.52mm) swap to Jade White
At layer #25 (2.08mm) swap to Blue for the rest.

If you get the message with the floating regions when slicing... you can ignore it
 

Here you will find my other clock faces collected
https://makerworld.com/en/collections/1715414