A scalable whale model, suitable for children's playthings or collectible figurines, engineered for single-click Print in Place fabrication. It incorporates supports that necessitate cautious removal

 Welcome to download, print, and comment. Upload photos of your printed results for reference. If you like it, thank you for your boost.

1. Most uploaded models have no supports or optimized supports. Beginner-friendly. One-click printing is available on mobile.

Try not to modify printing parameters. You can directly print with one click on your phone.

If there are supports, use modeling pliers to carefully remove them bit by bit. If you need to assemble, use 502 super glue.

2. The pictures you see are real photos uploaded after I successfully printed them.
For more real details of the model, you can scroll down on the main image and click to enlarge and view the details.

3. Visit my homepage, and you can choose to download more models.


4. The most common reason for print failure among beginners is poor first layer adhesion. It is recommended to wash the build plate with dish soap before printing.


Thank you for your boost. I will try to upload more models for everyone to download.

5. You may not share, sublicense, sell, rent, host, transfer, or distribute the digital or 3D printed version of this work, or any derivative works in any other digital or physical format (including but not limited to secondary creations of the item, and hosting on other digital platforms) in any way. These items may not be used for commercial purposes without permission.