FormD T1 Air Kit
Print Profile(2)
Description
Summary
Air Kit reduces temps, fan turbulence, and GPU fan speed in the FormD T1. It contains two parts that can be used together or individually: Fan Slab and Air Block.
Fan Slab
Fan Slab holds two 120mm fans and two 60mm fans. It prints in two pieces that snap together.
Fan-Mounting Options:
- Standard Case-Fan Screw - Uses self-tapping case screws that are included with fans.
- Threaded Heat-Set Insert - Uses M3X5X4 threaded heat-set inserts and M3 machine screws.
Air Block
Air Block fits either 4090/80 or 5090/80 Nvidia Founders Edition graphics cards.
Case Options:
- Formd T1 v2.1 - Front mount requires one M3X5X4 threaded heat-set insert, and attaches to side bracket brace with one M3-5 screw. Back/side mount uses one M3-5 screw.
- FormD T1 v2.0 - Front mount uses one M3-8 screw, attached to the front-panel IO-port mount - Remove front panel to install. Back/side mount uses one M3-5 screw.
- FormD T1 Two-Tone - Front mount requires one M3X5X4 threaded heat-set insert, and attaches to side rail with one M3-8 screw. Back/side mount uses one M3-5 screw.
Inspiration: EIGA - Exhaust Shroud NeedItMakeIt - 3D Printed Joinery
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (15)