Stream Deck Mini Under-Desk Slide-Out Mount
Print Profile(1)
Bill of Materials
- Flat head wood screws x 4: 3mm diameter 12 mm length
- 3M VHB x 1: A very small piece of double sided Tape to fix the position of the Mount Guide Plate
- 3M Brass Insert x 4: Optional
- 3M Screw x 4: 10 mm to 12 mm length
Description
Boost Me (for free)
If you like my work, drop a 👍 and hit “Boost” to help it reach more makers! Your support means more free designs and cool future projects for the community.
A fully 3D-printable under-desk mount designed specifically for the Stream Deck Mini.
This clever mechanism allows the device to slide forward and tilt downward at a 40° angle for ergonomic access, then smoothly retracts back under the desk when not in use.
Perfect for clean setups, creators, and streamers looking to keep their workspace minimal but functional.
Key Features:
- ✅ Sliding + Tilting Cradle for the Stream Deck Mini
- ✅ Support-free design – optimized for strength and FDM printing
- ✅ Modular assembly with optional glue or M3 screws + brass inserts
- ✅ Includes mount guide plate for easy and accurate desk installation
- ✅ Comes with a clean, IKEA-style illustrated assembly manual “Check Documentation”
Includes all STL parts, a print profile, and optional insert variants.
Designed for durability, ease of use, and a professional finish.
Created by Dimension W.
Assembly Notes
- All parts are optimized for FDM printing without support.
- Orientation and part separation are designed to maximize strength and reduce the risk of layer separation.
- Optional screw mounting improves durability and modularity.
Hardware Required
- 4x Wood Screws (Recommended: ≤12 mm length)
For securing the mount to the underside of an 18 mm thick tabletop without poking through. - Optional: 4x M3 Screws (12 mm length)
For fastening the track pieces to the base pieces. - Optional: 4x M3 Brass Inserts
Inserted into the base pieces to receive the M3 screws. - Double-Sided Mounting Tape
To temporarily fix the mounting guide plate in place before screwing it down.
Track Insert Mounting Options
The Track_Insert_x6.stl parts are used to secure the Track pieces to the Base pieces at three positions per side:
- For a permanent lock, use super glue to fasten the inserts into the slots.
- For a serviceable approach, install:
- 2x M3 brass inserts into each base (4 total)
- 2x M3 screws through each track (4 total)
Installation Guide
- Align the Template
Position the top guide plate under your desk using the included visual alignment template. - Fix with Tape
Add strong double-sided tape (e.g., 3M VHB) to hold the plate in place temporarily. - Insert the Assembly
While holding the full assembly (cradle, arms, tracks, bases), push it up into the guide slot under the taped plate. - Secure with Screws
Drive 4 short wood screws into the mounting plate to permanently secure the mount.
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (32)