Orbital Tray Jewelry Box - Free 3D Print Model

Search models, users, collections, and posts

NIPRO

Tools>Organizers

IP Report

GIF

Print Profile(1)

All

P1S

X1 Carbon

X1E

H2D

P1P

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

4.2 h

2 plates

3.8(5)

Open in Bambu Studio

Boost

162

121

Released

Description

Content has been automatically translated.

Show original

This design is extremely easy to print and in just over 4 hours and 100g of PLA you will have a beautiful orbital jewelry box.

If you extend the piston in multiples of 15.4mm you can achieve as many trays as you want.

I recommend using 10mm diameter and 1mm thick magnets. This way you will achieve a perfect central resting position.

I have also uploaded the dxf file of the template to cut the carpet with a laser or print it on paper and cut it manually.

Usage recommendation.
Place the heavy chains in the lower tray so that the assembly does not become unstable during use. Also place some anti-slip rubbers to facilitate the rotation of the trays. I recommend placing mini washers between each disc for a smooth movement.

I hope you like it and that you tell me what you think of my design. I was inspired by several designs that I have seen, but none of them quite pleased me.

You would help me a lot if you left a comment and a boost.

Comment & Rating (10)

@user_987488868

the truth is a very good design, fast and simple

Show original

@user_4105813797

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Wife uses it for jewerly and it works well.. the bigger magnets are a plus. Some of the magnets didn't want to fit on the pieces that sat on the print bed because of having to use the supports. Don't know if there's a fix or setting i could've done to improve.

The profile uploader has replied

@NIPRO

Hello again! thanks for having printed both models Perhaps I should have made the recess for the magnet deeper in the base design I will consider it for a future larger V3 If despite the criticism you consider the designs useful to you I would greatly appreciate it if you would give me some boosts so that the algorithm recommends my designs This helps me improve every day Many thanks

(Edited)

Show original

@user_1655082974

Print Profile

0.2mm layer, 2 walls, 15% infill

this came out horrible and no one should print this

The profile uploader has replied

@NIPRO

But what kind of review is this? Zero constructive. Can you tell me exactly what went wrong? Did you add supports? Explain yourself well to see if I can help you. Regards,

(Edited)

Show original

@user_2949074432

Print Profile

0.2mm layer, 2 walls, 15% infill

awsome

(Edited)

The profile uploader has replied

@NIPRO

Greetings! Should this prove to your satisfaction, kindly grant a boost 🙏🏻

Show original

@DarkZachi83

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

The profile uploader has replied

@NIPRO

Thank you very much Dark for the boost

Show original

@davidfontes

Print Profile

0.2mm layer, 2 walls, 15% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.