hueforge pokemon pikachu
Print Profile(1)
Description
Print with 100% infill using a 0.08mm layer height and a 0.16mm base layer.
The model measures 133.33 x 200 mm.
You may print with layer heights above and below the minimum depth of 0.48 mm.
The maximum depth is 2.2 mm and the actual depth is 2 mm.
Filaments used:
PolyLite Black PLA: Transmission distance: 0.3
Bambu Lab Basic Red PLA: Transmission distance: 4
Bambu Lab Basic Yellow PLA: Transmission distance: 6
Bambu Lab Basic Jade White PLA: Transmission distance: 5
This print utilizes 4 unique filaments.
Replacement instructions:
Begin with black.
At layer #8 (0.72 mm), replace with red.
At layer #13 (1.12 mm), replace with yellow.
At layer #20 (1.68 mm), replace with Jade White for the remainder.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (16)