Hogwarts / Cinderella Castle - Celestial Bookmarks

Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page.

Welcome to these two enchanting castles of fantasy and celestial wonder based on the two most iconic castles - Harry Potter's Hogwarts Castle and Disney's Cinderella Castle. Hogwarts is centered in magical realm with a flowing design with a celestial motif above it, with a prominent crescent moon and radiant sun, both adorned with serene, anthropomorphic faces as stars of various sizes are scattered throughout. It is a blend of gothic fantasy and ethereal beauty. Cinderella is more streamlined and emphasizes verticality. It is showcased at the base with the upper portion featuring crescent moons with distinct faces, accompanied by a beaming sun and scattered stars against a dark, starry sky. It can be printed using blue/cyan in place of orange/brown to match the blue tone of Cinderella Castle. Both pieces share a common theme of celestial bodies and fantastical architecture, making them ideal companions for journeys into imaginative literary worlds.

Fantasy Celestial Castles: Hogwarts and Cinderella Castle

Pictures shown are printed in an 0.2mm Nozzle
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Orange Transmission Distance: 7

PLA BambuLab Basic Gold Transmission Distance: 5

PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer (0.88mm) swap to Orange

At layer (1.12mm) swap to Gold

At layer (1.44mm) swap to Jade White for the rest.

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away. 

More prints: Bookmarks -- Portraits -- Coasters -- Clocks -- Puzzles -- Display Stands -- Display Frames

They are sorted and can be found in my Collections - https://makerworld.com/en/@3djd/collections