Sypha Belnades *Castlevania*

Sypha Belnades Castlevania Hueforge 

You can change the size to what you like on X and Y axis but do not change the Z value.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.15997mm

Filaments Used:

#080a0d PLA PolyLite Black Transmission Distance: 0.3

#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3

#9b9ea0 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5

#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Blue Gray

At layer #15 (1.28mm) swap to Ash Gray

At layer #20 (1.68mm) swap to Jade White

At layer #25 (2.08mm) swap to Black for the rest.