Wu-Tang Clan - Ol' Dirty Bastard Hueforge Poster

Wu-Tang Clan - Ol' Dirty Bastard Hueforge Poster.

Rest in Peace ODB!

Project: Ol Dirty Bastard.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #e7ceb5 PLA BambuLab Basic Beige  Transmission Distance: 8
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Blue Gray
    At layer #11 (0.96mm) swap to Beige

Border Only Colors from here until the end.
    At layer #18 (1.52mm) swap to White for the rest.