Bogg Bag Cup Holder
Print Profile(1)
Description
Connector pieces come in two sizes. One is for the OG or XL Bogg Bag size and the other fits the holes on a Baby or Bitty sized bag.
After printing all of the parts, take your connector and drill 2 - M3 x 12mm screws through the holes so the screw ends are visible on the side with the writing. This piece will need to be epoxied or CA glued into the slot on the cup holder itself.
For the screw connectors, there is a pause midway through the print to inlay M3 nut into them then you continue the print to finish. This file will provide you with both round and star shaped connectors.
Parts:
Nuts: https://www.amazon.com/dp/B01IWUSDYY?ref=fed_asin_title
Screws: https://www.amazon.com/dp/B07CNFTK99?ref=fed_asin_title&th=1
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)