Remote controller case for Xiaomi TV Stick 2nd generation

This is a case for the second-generation Xiaomi TV Stick remote.

No glue or screws are required.
 

The tolerances are perfect (if you have your equipment properly calibrated), so nothing additional is needed to stay in place.

A small section is included to test if you need to adjust tolerances for your filament before printing the entire board:
 

I designed the case to be quite thick.
Two versions are included, one with 10x2.60 mm magnet holes (you can edit them to your liking in the included .f3d file).
The design includes a groove around the outer perimeter to add an optional rubber band if your print is a bit loose, but it's not necessary if it's printed correctly. The rubber band will be hidden in the groove.
It can probably be printed without supports, but I've added normal/adjusted supports by default; if your printer is properly calibrated, they won't leave any marks. (I use generic PETG)
The .f3d file is included for anyone who wants to make changes (the editing history is a bit chaotic XD)
 

Attention! The controller has a sticker on the back, on the top, which makes it a bit difficult to insert into the case if you print it too tight. If this bothers you, you can remove it or edit the tolerance of the part to keep the sticker with its serial number.