Strap Buckle (No Supports)

There are two models, one with teeth and one without. I recommend the model with teeth. This will prevent slippage of the straps.

Update 28SEP2018: I uploaded a strap keeper to hold the straps together.

Although it looks very similar to the original model, this is a complete redesign. I made some changes that suited me better. It has less play and self-centers when clicking the parts together. I also made the button smaller, although it's just as easy to use.

The buckle is self-tightening. The harder you pull it apart, the more engaged the locking mechanism becomes. Under load, it will not slip apart unless it catastrophically fails.The engagement has a very satisfyingclick when you connect the two parts together.

You could also use this as a belt buckle.

I have uploaded two models for each part. The only difference is the strap hole sizes. Most people will probably use the large size.

I printed these at 80% scale which produce a strap hole width of 21mm.

Native size produces a strap hole width of 27mm.

Please post your makes and comments!

Check out my other designs https://www.thingiverse.com/mistertech/designs

Print Settings

Printer:

Hatchbox Alpha

Rafts:

Supports:

No

Resolution:

Infill:

30% (probably doesn't matter)

Notes:

Category: Replacement Parts