Skull w/Flower Design 180x185mm Hue Forge - Free 3D Print Model

Search models, users, collections, and posts

Lazers and Layers

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

X1 Carbon

P1S

X1E

H2D

P1P

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.08mm layer, 2 walls, 100% infill

Designer

11 h

1 plate

5.0(3)

Open in Bambu Studio

Boost

Released

Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used:
    #080a0d PLA PolyLite Black Transmission Distance: 0.3
    #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
    #8c9099 PLA PolyLite Grey Transmission Distance: 1
    #e2dedb PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to Grey
    At layer #20 (1.68mm) swap to White for the rest.

As with any HueForge you are able to scale the model to save on print time just dont not change the z axis as this will affect the overall quality of the image.

Boost Me (for free)

If you enjoyed printing this model, please consider leaving a **like or a boost** to show your support! Your feedback and support goes a long way and helps others discover models you’ve enjoyed too. Thank you for stopping by.