Mario’s3D

lámpara LED 001

cover

photo_3_2025-07-27_18-35-22.jpg

photo_2_2025-07-27_18-35-22.jpg

photo_1_2025-07-27_18-35-22.jpg

plate_1.png

2025-07-27_86ef960e445cb.jpg

0.16mm layer, 2 walls, 15% infill

IMG_4582.jpg

IMG_4581.jpg

MANO DE IRONMAN PARA A1 MINI como lámpara!! La mano de tu héroe favorito para decorar la habitación mas friki o la de los mas pequeños y por qué no, la tuya misma!!Atento a la configuración porque el final de los soportes para los voladizos está hecho en PETG, si quieres cambiar esa configuración y usar PLA tardará mucho menos, pero te arriesgas a que las marcas sean mas severas, de esta manera ha quedado prácticamente perfecta.La lámpara que he usado es la misma que se usa en el Lámpara LED 001 de bambulab en makerworld&nbsp;IRONMAN HAND FOR A1 MINI as a lamp!! Your favorite hero&#39;s hand to decorate the geekiest room or the little ones&#39; room, and why not, your own!Be careful with the configuration because the end of the supports for the cantilevers are made of PETG. If you want to change that configuration and use PLA, it will take much less time, but you risk more severe marks. This way, it turned out practically perfect.The lamp I used is the same one used in the bambulab LED Lamp 001 at makerworld.&nbsp;

An Ironman Hand for A1 MINI serving as a lamp! Presenting the iconic hand of your cherished hero, a quintessential accent for the quintessential enthusiast's abode, the charming chambers of the young, or indeed, your very own distinguished dwelling!A meticulous consideration of the configuration is advised, as the terminal sections of the cantilever supports are meticulously fashioned from PETG. Should you elect to deviate from this setup and employ PLA, the printing duration will be substantially curtailed; however, this entails a heightened propensity for more discernible surface imperfections. Through adherence to this methodology, the resultant piece has attained a state of virtually unblemished perfection.The illumination apparatus I have employed is precisely analogous to the LED Lamp 001 featured by Bambu Lab on MakerWorld&nbsp;IRONMAN HAND FOR A1 MINI as a lamp!! Your favorite hero&#39;s hand to decorate the geekiest room or the little ones&#39; room, and why not, your own!Be careful with the configuration because the end of the supports for the cantilevers are made of PETG. If you want to change that configuration and use PLA, it will take much less time, but you risk more severe marks. This way, it turned out practically perfect.The lamp I used is the same one used in the bambulab LED Lamp 001 at makerworld.&nbsp;

just_print_it

47228.jpeg

47206.jpeg

47210.jpeg

47212.jpeg

47214.jpeg

47222.jpeg

47224.jpeg

Screenshot 2025-10-14 111042.png

Screenshot 2025-10-14 111030.png

Screenshot 2025-10-14 110941.png

Screenshot 2025-10-14 110923.png

I worked with the original designer on this to improve how the light sits in the hand. I added another negative modifier so that the light couldn&#39;t slip deep into the hand. I also trimmed the bottom of the hand so it sits flush on the build plate. It was hard to adjust the depth of the opening and see just how the light would fit. I did a couple of test prints. The pictured one is the last attempt. So, before uploading this new file I adjusted the opening slightly so it doesn&#39;t sit quite as deep into the hand and I increased the diameter a bit so the light is easier to get in and out of the hand as well. If this should cause the light to be too loose, I would recommend maybe a piece of double-sided tape to secure the light and that should work well.  Hopefully someone can print this and report back how everything is working. It&#39;s getting a bit expensive for me to keep printing test prints. :P Here is the light I use → <a target="_blank" rel="noopener noreferrer ugc" href="https://www.amazon.com/Howarx-Printer-Compatible-Makerworld-Hardware/dp/B0DYJKVMDP?pd_rd_w=TZuv8&amp;content-id=amzn1.sym.51509f0d-3718-420d-a027-567aaea7c2f9&amp;pf_rd_p=51509f0d-3718-420d-a027-567aaea7c2f9&amp;pf_rd_r=XTP9MYHKE9FR3HMWW3N8&amp;pd_rd_wg=Hbnja&amp;pd_rd_r=2c0d5954-087f-4821-8757-6da4810f7ca9&amp;pd_rd_i=B0DYJKVMDP&amp;ref_=pd_bap_d_grid_rp_hxwhrp_sspa_dk_bia_0_2_i&amp;th=1">led light</a> EDIT: It was mentioned that having a heavier base would benefit the lamps stability. Rather than upload a new version I can tell you how to do that. Just use the cut tool in Bambu Studio to cut the part at the wrist while leaving everything in place. This will create two separate parts but they will still print as a 1 unit of course. Then adjust infill density of the wrist part accordingly. Something like 50% would probably add the necessary heft. It will add some material and about 1 to 1 ½ hours of print time however as an FYI.

0.2mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

MANO DE IRONMAN como lámpara!! La mano de tu héroe favorito para decorar la habitación mas friki o la de los mas pequeños y por qué no, la tuya misma!!Se ha modificado la configuración, ahora los soportes si no quieres usar PETG en las capas finales, puedes hacerlos directamente en PLA, salen muy fácil y no deja marca prácticamente.La lámpara que he usado es la misma que se usa en el Lámpara LED 001 de bambulab en makerworld&nbsp;IRONMAN HAND as a lamp!! Your favorite hero&#39;s hand to decorate the geekiest room or the little ones&#39; room, and why not, your own!The configuration has been modified. If you don&#39;t want to use PETG in the final layers, you can now make the supports directly in PLA. They come out very easily and leave virtually no marks.The lamp I used is the same one used in the bambulab LED Lamp 001 at makerworld.&nbsp;<a target="_blank" rel="noopener noreferrer ugc" href="https://buymeacoffee.com/g2rs8c5bg6s">https://buymeacoffee.com/g2rs8c5bg6s</a>&nbsp;

IRONMAN HAND as a lamp!! Your favorite hero's hand to decorate the geekiest room or the little ones' room, and why not, your own!!The configuration has been modified. If you don't want to use PETG in the final layers, you can now make the supports directly in PLA. They come out very easily and leave virtually no marks.The lamp I used is the same one used in the bambulab LED Lamp 001 at makerworld&nbsp;IRONMAN HAND as a lamp!! Your favorite hero&#39;s hand to decorate the geekiest room or the little ones&#39; room, and why not, your own!The configuration has been modified. If you don&#39;t want to use PETG in the final layers, you can now make the supports directly in PLA. They come out very easily and leave virtually no marks.The lamp I used is the same one used in the bambulab LED Lamp 001 at makerworld.&nbsp;<a target="_blank" rel="noopener noreferrer ugc" href="https://buymeacoffee.com/g2rs8c5bg6s">https://buymeacoffee.com/g2rs8c5bg6s</a>&nbsp;

IRON MAN HAND LAMP

ASIA

Print Profile(3)

Bill of Materials

Description

Comment & Rating (231)

License

Related Models