Maple leaf mosquito coil holder with ash container
Print Profile(2)
Description
This 3D-printed mosquito coil holder, shaped like a maple leaf, includes an ash container. Compatible with all 10cm to 15cm diameter coils using the original support provided with the coils. The metal support holding the coil can be attached in three ways:
Method 1: Using the two holes in the center of the leaf and one or two self-tapping screws.
Method 2: Using super glue or hot glue.
Method 3: Using double-sided tape applied to the back of the metal support (my preferred method).
The print consists of two parts: the maple leaf back panel and the ash container. The two parts simply interlock via grooves, using a little superglue.
This coil holder keeps the coil vertical, saving space, and the integrated container prevents ash from falling onto unwanted surfaces.
Printing is relatively quick, just 1.3 hours. Two profiles are provided, one in PETG HF and one in ABS; I recommend ABS, but PETG works well too.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)