duckyPadPro Case with Stand

Friend requested I print them a case for their duckyPad Pro using the excellent case designed by mitch, but they wanted a stand.

I modified the bottom part of the case to accept m3 heatset inserts and 8x3mm magnets, and created 3 different stands to connect using either fastener type (or both I guess?).

I intended the bottom of the stands to have rubber feet attached. The flat stand is provided so that if and when the duckyPad is flat, the magnets don't collect debris and the bottom surface doesn't ruin your desktop. The flat plate also allows rubber feet to be attached that do not interfere with later reattaching an angled stand if desired.

In the supplied project files I have included mitch's top plate as well but it is unmodified, and I realize now that I did not include the buttons. Those can be found in mitch's files. The case I ultimately delivered used the modified top plate from mrw2828, which can be seen in my print profile image. The knobs shown were found on another site.

Use 4 or 5mm m3 heatset inserts with a 8mm m3 bolt. 8x3mm for the magnets.