Stargate Zat Nik Tel

Printed in Amazon PLA Basic Gold

at 0.08mm layer height

Turn Aux Fan off and Print slowly

I adjusted the size of the fins, since the original ones seemed to big compared to the gun. I then mirrored the half of the gun and assembled the pieces, so that you have a complete gun, which you can print in one go.
 

The first print profile is oversized, it is the size the original maker made with my changes already applied and was my first attempt on this gun.

The second print profile, has adjusted sizes. The Zat is more screen accurate like this, i leave my first (Oversized) profile here, so that you can choose, which you like more.

For clarification, i‘ve never posted a A1 version, since it would shake loose with a bedslinger. The higher you print the more movement would build up, ending in the model falling over and thus a failed print.

Also altering the settings in any way, could cause it to fail. I‘ve finetuned those profiles, over hours, so please stick to them. I can not, guarante that other settings will work.

Have fun printing^^