Elaak

cover

20250726_192534_(1).jpg

20250726_192507.jpg

plate_1.png

--.2mm layer height--2 walls--0.4mm nozzle--10% Infill--You can use brim if having adhesion issues--------For the Smaller part use Mouse Ear Brim only--------For Bigger part try to just use outside brim--------I also tried printing them inside of each other and that seemed to work too--Used Silk PLA and Matte PLA&nbsp;

0.2mm layer, 2 walls, 15% infill

<h2>Print Settings</h2>10% infill--2 walls--0.4mmNozzle--No Support

Print Profile(1)

Description

Print Settings

Comment & Rating (53)

License

Related Models