High-Pressure Water Hose Nozzle Set (0.25"–0.075")

This is a set of high-pressure hose nozzles designed for pressure cleaning, made to be 3D printed and used with standard water hose setups. Each nozzle features a different orifice size for custom water jet control, letting you switch between broader sprays and concentrated jets depending on your cleaning task. These fit a standard hose thread of 3/4GHT. They should thread right on without any issues when printed correctly, no supports needed. I printed mine out of PLA because I have a lot of it and don't plan leave it on the hose all the time. If you will leave it connected outside for any length of time, you may use want to use a more durable UV resistant filament. 

Included nozzle inner diameters:

• 0.25" – High Flow
• 0.2"
• 0.15" - Recommended for general use
• 0.1"
• 0.075" – Focused jet

Great for washing bikes, tools, patios, lawn furniture, or for general-purpose outdoor cleaning projects.

They do need an internal gasket to be water tight. I had some extra hose gaskets anyways so I used those. Link below for an amazon listing, handy to have extra for leaky water hoses/attachments.

https://www.amazon.com/dp/B07TBZ9C71?ref=ppx_yo2ov_dt_b_fed_asin_title

Alternatively, you can print your own. Additional link below is to JC58's model of gaskets that also work great. Note you will need a softer TPU, the TPU for AMS is too hard and wont form a good seal. 

https://makerworld.com/en/models/637641-garden-hose-washer-gasket?from=search#profileId-563120

Let me know if there are any issues/questions. Boosts/comments are always appreciated!