Bottle Marker with Cap - Free 3D Print Model

Search models, users, collections, and posts

BamBam Design

Tools>Gadgets

IP Report

GIF

Print Profile(6)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

[COLORED 6x different symbol] 0.2mm layer, 3 walls, 15% inf

Designer

1.2 h

1 plate

4.9(188)

[1xBlank] 0.2mm layer, 3 walls, 15% infill

Designer

16 min

1 plate

4.9(242)

[Engraved 6x different Symbol]0.2mm layer, 3 walls, 15% inf

Designer

1.1 h

1 plate

4.9(50)

[1x Dragon Head] 0.2mm layer, 3 walls, 15% infill

Designer

23 min

1 plate

4.8(41)

Click to see more

Open in Bambu Studio

Boost

967

2335

716

261

4.5 k

3.7 k

Released

Description

Bottle/Beer Marker with Cap

Completly redesigned V2 is out: https://makerworld.com/en/models/492439

Perfect Party Gadget! Every Crown Cap Bottle could be marked with the snap fit Bottle Marker! Never ever someone drinks your Beer😎

And you can simple close it with the integrated Cap! Kind of fidget toy included😁

It's kind of tight (Not 100%), if the bottle falls down, it will only lose a few drops. https://youtube.com/shorts/gyhAHNn_5Kk?si=kBkeaVIVPi31QMf5
Protect your Drink from insects!
No other stuff can go into the bottle!

It's a Print in Place Part and it works right after the print. Simple Snap over the bottle and close the Lid.

Profile with 1 Blank Bottle Cap. Design your own Cap and upload as profile here. Hope we see much cool designs here in the future.
Profile with 6 different symbols. Simply Exclude Objects to print your wishes. Perfect if you have not that much colors for all guests
Profile with 6 different symbols in two colors for best look.
Profile with Dragonhead Cap in two colors

Happy Printing! If you find it useful please leave a like👍 and follow me✔. It's free🤗

Disclaimer:

This work by BamBam Design is licensed under Standard Digital File License

Strict non-commercial, personal use only license.

You are not allowed to Remix or Copy this model to other 3D printing websites without my permission.

Membership

You want to sell printed objects from my designs or just support my work? Now you can subscribe on Makerworld! Thank you!

Join

Comment & Rating (716)

@HAL2001

Really well done 👍. I immediately printed them in the best club colors 😀

The designer has replied

Show original

@BamBamDesign

Well at least Borussia 😉 I'll keep my fingers crossed in the cup🍻

Show original

@HAL2001

Replying to @BamBamDesign :

I was almost afraid that this would be misinterpreted 😱. Of course, Hannover 96 is meant by that 🥳

(Edited)

Show original

@BamBamDesign

😂😂 That would be a cool idea with coats of arms on the caps. Hanover would go well

Show original

@ShayneTroxler

Print Profile

[1xBlank] 0.2mm layer, 3 walls, 15% infill

personalised it. and it printed perfect.

The profile uploader has replied

@BamBamDesign

Nice Paul, thx for your review 😉👍

@user_3960097080

How did you do that I would also be interested

Show original

@ShayneTroxler

Replying to @user_3960097080 :

I did it in Bambu Studio. With the add text option

Show original

@user_125751560

Print Profile

[1xBlank] 0.2mm layer, 3 walls, 15% infill

This robust, exquisitely crafted beer bottle stopper ensures an impeccable seal, presents a striking aesthetic, and even effectively deters wasps. It is eminently suitable for garden gatherings, barbecue festivities, and discerning collectors. An unequivocal recommendation

(Edited)

The profile uploader has replied

Show original

@BamBamDesign

My sincere appreciation for your evaluation. I would be delighted if you would also test my V2, as it boasts a superior fit👍

Show original

@user_125751560

Replying to @BamBamDesign :

Very well, I shall proceed 👌

Show original

@user_596317920

I also printed six today, but the first one, with the male symbol, didn't print as well However, five are enough for me And if necessary, I can simply print another one

The designer has replied

Show original

@BamBamDesign

Thank you for the feedback, the bed adhesion was apparently insufficient. I highly recommend cleaning the bed with soapy water before each print and reapplying liquid glue from the Bambu Store approximately every 30 prints. This helps tremendously. You are also welcome to print my V2 version; it fits even better and is very easy to customize 😉

Show original

@user_596317920

Replying to @BamBamDesign :

Thank you for your response

Show original

@ENN_Designs

Boosted

Print Profile

[1xBlank] 0.2mm layer, 3 walls, 15% infill

nice design!

The profile uploader has replied

@BamBamDesign

Thank you, have a look at my optimized V2, as well😉

(Edited)

@ENN_Designs

Boosted

Replying to @BamBamDesign :

Oh why didn‘t I found this myself… That looks great - especially the version with the seal! Thank you so much 🙏🏼

@user_2194168946

Print Profile

[COLORED 6x different symbol] 0.2mm layer, 3 walls, 15% inf

A superb party favor idea personalized

The profile uploader has replied

Show original

@BamBamDesign

Thank you for your rating, also check out V2, it fits even better Greetings

Show original

@user_2194168946

Replying to @BamBamDesign :

I will definitely try it, thank you

(Edited)

Show original

@rgb732

Print Profile

[Engraved 6x different Symbol]0.2mm layer, 3 walls, 15% inf

Verry fast print in place. willl be printing the rest soon. thank you!

The profile uploader has replied

@BamBamDesign

Thank you for review!👍🏼 Was invented for Crown Caps, but looks ok on PET Bottles,too. Good information😉

@rgb732

Replying to @BamBamDesign :

Plastic Bottle was only thing I could find to snap a quick photo of your cap. I only had Can Beer Lol. thanks again!

@user_3981245214

Print Profile

[COLORED 6x different symbol] 0.2mm layer, 3 walls, 15% inf

these lids fit great. They are really very practical for the summer. Thank you very much for the great file

(Edited)

The profile uploader has replied

Show original

@BamBamDesign

Thanks, there is already a V2😉

Show original

@Wayne647

Print Profile

[1x Dragon Head] 0.2mm layer, 3 walls, 15% infill

Useful and quick to print. Thank you.

The profile uploader has replied

@BamBamDesign

You're welcome :)

@3d_vison

Boosted

Print Profile

[1xBlank] 0.2mm layer, 3 walls, 15% infill

Cool print, but it's very hard to remove from the bottle

The profile uploader has replied

Show original

@BamBamDesign

Hello this varies greatly depending on the filament and calibration as well as the bottle tolerance It is best to adjust it to your needs using "Hole compensation" And feel free to test my V2: https://makerworld.com/models/492439 Kind regards

(Edited)

Show original

@3d_vison

Boosted

Replying to @BamBamDesign :

Thanks for the quick feedback 😊 I will try it out

(Edited)

Show original

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Bottle Cap/Marker V2 - Protect your Drink

BamBam Design

14.4 k

5.8 k

Beer Bottle Opener

DDDP

15.8 k

4.9 k

push opener (bottle opener)

sabesnait

12.4 k

7.1 k

Bottle Marker & Cap

next.layr