Working M4 Screws and Nut - Free 3D Print Model

Search models, users, collections, and posts

Ian

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

Orientation-fixed 0.2 nozzle 0.08 layer 4 walls, 100% infill

9.7 h

12 plates

4.8(33)

0.2mm nozzle, 0.08mm layer, 4 walls, 100% infill

9.6 h

12 plates

4.6(50)

Open in Bambu Studio

Boost

320

807

2.4 k

1.2 k

Released

Description

Boost Me (for free)

If you have found these models to be helpful, please consider clicking the boost button.

The M4 screws (which includes a nut) were CADed with the intent of being able to use them in LOW STRESS SITUATIONS. The screws should be similar to the goBILDA M4 screws, which you can use interchangeably with these 3D-printed screws, as shown in a picture above.

Print Instructions:

I printed the screws on a Prusa MK3S+, which had a 0.25mm nozzle, using PLA. I used 100% rectangle infill, random seam position, a layer height of 0.1mm, and two perimeters. The print speed was 10-40mm/s.

Note: all the print files shown in the pictures were printed on an MK3S+ if you have a Bambu printer please use your own print settings as the

MK3S+ does not compare.

If the M4 screws do not properly work, please let me know by leaving a comment or make.

Happy Printing!

Comment & Rating (89)

@Elebeyt

Print Profile

0.2mm nozzle, 0.08mm layer, 4 walls, 100% infill

Works perfectly well. Its just that my petg is very wet🤣but I managed to print a perfect one after drying my filament🫶

@NoisyDream18

wow dude, that is some cooked filament

@Bart_9

Print Profile

0.2mm nozzle, 0.08mm layer, 4 walls, 100% infill

PLA material works fine for that model, in the attached picture you can see the screws in application :)

@dangerwaffle

Print Profile

0.2mm nozzle, 0.08mm layer, 4 walls, 100% infill

Phenomenal, printed fast, strong, and accurate

@gravitonus

Print Profile

0.2mm nozzle, 0.08mm layer, 4 walls, 100% infill

@Spicycocksauce

Boosted

Print Profile

0.2mm nozzle, 0.08mm layer, 4 walls, 100% infill

Needed an m4 for my printed spool roller and this worked perfectly. The screw and nut thread together without issue. I printed it with my .4mm nozzle.

@Wheezy

Print Profile

0.2mm nozzle, 0.08mm layer, 4 walls, 100% infill

Tolerance can be a little tight, but if you play around with the XY offset on the nut then they work. i set it to between .05 to .1 and that was perfect.

@Booyashaka

Print Profile

0.2mm nozzle, 0.08mm layer, 4 walls, 100% infill

nice. good for light duty stuff

@kruzy_models

Print Profile

0.2mm nozzle, 0.08mm layer, 4 walls, 100% infill

Strength Issue:broke instantly

The profile uploader has replied

@tss082091

It's only for decorative connections and not a real screw for fastening 🤦‍♂️

(Edited)

Show original

@kruzy_models

Replying to @tss082091 :

there is nothing wrinten about this so how i could know?

@tss082091

Replying to @kruzy_models :

It is generally understood that plastic is not as strong as metal, so I don't think it's necessary to explicitly state this. I believe everyone should be smart enough to know that.

(Edited)

Show original