M1A1 Abrams 1:35 Scale USA

If you enjoy my work, consider supporting me ❤️ ❤️ ❤️
Buy Me a Coffee: buymeacoffee.com/bavaria3 | Ko-fi: https://ko-fi.com/bavaria3

Don’t miss out — follow me for more top-quality tank models!

All models are designed from scratch in Fusion 360 and validated through real prints using my own equipment, with no AI involved. Each design is tested and refined through multiple iterations to ensure reliability and real-world usability.

If you like my work, feel free to like, save, and share your thoughts in the comments — your feedback directly helps improve future designs.

================================

📋 Recommended Print Settings (For Best Results) 

• Filament: PLA. Different materials have different shrink rates, so using other filaments might cause fitting issues or dimensional errors during assembly. 
• Slicer: Bambu Studio. I recommend using my default profile — I’ve tuned it specifically for this model. 
• Ambient Temperature: If you’re using an open-frame printer like the A1 or A1 Mini, keep your room above 20°C (68°F) to prevent warping. 
• Print Bed Preparation: Wash with soap and water, then dry thoroughly to ensure good adhesion. For small parts, apply a glue stick for better bed adhesion. 

🔧 Assembly Diagram Notes 

• You’ll need super glue to attach all the components together. This is an early build of mine, so all the wheels need to be glued in place.

These plates are the heat-dissipation mesh, I use Bambu Lab’s software to set the top shell thickness to 0, and set the infill density to 50%—this will simulate the mesh effect.
 

The turret rotates very smoothly, and the machine gun on the turret is also movable.

================================