Aquarium Fan Bracket x4, a component of the Smart Aquarium System

Parts List:

Cooling Fan: 40*40*20mm DC fan 5V/12V 4 pieces (Fan 4020 costs around 5 yuan/piece on Taobao)

Heat-set Inserts: M3*5*4.5 12 pieces

Screws: 304 socket head cap M3*25 8 pieces, flat head ultra-thin M3*8 12 pieces

Nuts: Hex nuts 8 pieces

Note:

1. All heat-set inserts should be installed on the middle triangular model

2. Install the heat-set inserts first, then assemble the bracket, and finally install the fan

3. This model is suitable for tank walls approximately 6mm thick; (If you need other wall thicknesses, please leave a message, I will handle it when I have time)

4. Testing shows that it can lower the water temperature by about 4 degrees.

This is a component of the "Xianmu Smart Aquarium System v1.3"
For the complete system, please visit https://github.com/miaokingsoft/HydroMonitor-RPi/