Car comic style
Print Profile(1)
Description
Please rate if you print, this really helps me, thank you
You can resize the model, but only change the X- and Y-axis NEVER change the Z-axis
FOR A1 MINI USERS, YOU CAN OPEN THE FILE AND REORIENTATE THE HUEFORGE ON THE BUILDPLATE
Please rate my file, this really helps me, thank you
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 114.29x200.01mm in size
You may print at higher layer heights below the Min Depth of 0.8mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Kexcelled Sky Blue Transmission Distance: 2.6
PLA Jessie Premium Purple Ice Transmission Distance: 18
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Sky Blue
At layer #13 (1.12mm) swap to Purple Ice
At layer #17 (1.44mm) swap to Scarlet Red
At layer #22 (1.84mm) swap to Yellow for the rest.
Boost Me (for free)
I hope you like the print if you do please consider a boost. It's for free and it would help me a lot.
Thank you and enjoy the print
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)