Disney Ear Holder - Free 3D Print Model

Search models, users, collections, and posts

Killians82

Props & Cosplays>Other Props & Cosplays

IP Report

Print Profile(2)

All

P1S

P2S

X1 Carbon

H2D Pro

P1P

H2D

X2D

H2C

H2S

X1E

A2L

0.2mm layer, 3 walls, 10% infill

Designer

4.3 h

2 plates

5.0(46)

Extension and Longer Sides

Designer

11.4 h

4 plates

Open in Bambu Studio

Boost

530

1718

656

540

Released

Description

My wife collects Disney Ears and has quite a large collection. I took inspiration from other ear holders I found online and made my own with some cuts for filament savings and speed of printing. She also collects misc Disney pins so I included a spot on each ear to put some pins. While this space does not allow for mass storage of pins it allows you to decorate the holder with some of your favorites or maybe duplicates that you don't have another place for.

No supports needed for any of the pieces. It should have a good snug fit and will only fits together one way, so assembly is very easy. If your tolerance doesn't allow for a friction fit you may need a drop or two of glue.

I just uploaded a new print profile that adds the ability to link lengths of these ear holders together. There are also longer side pieces that max out the 256mm build plate.

Boost Me (for free)

If you like my models, please consider leaving me a BOOST! I also enjoy useful feedback so I can make adjustments to my designs.

Comment & Rating (78)

@RogersFabLab

Boosted

Love the idea. We printed two sets. Had no issues at all. Pins fit snuggly.

(Edited)

The designer has replied

@killians82

Turned out great. Thanks for the rating.

@Shenanifitz

it printed nicely but the holes are off from the pegs. Will try to fool around with it

The designer has replied

@killians82

I'll check the file right now. I may have uploaded an older iteration by accident.

@killians82

I just uploaded a corrected file. I had made that mistake early on and corrected the horizontal pieces. The face pieces you printed should be good, you would just need to reprint the horizontal pieces. I apologize for the wasted filament, that was a rookie move on my part for not triple checking the file.

(Edited)

@Shenanifitz

Replying to @killians82 :

thank you! Will try when I get a chance

@tehpwnage

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

It turned out great thank you for creating this!

@user_2257918242

Print Profile

0.2mm layer, 3 walls, 10% infill

DIL has a few Ears and wanted a holder. Found this one and turned out pretty nice. Think she’s going to love it.

@Bam_Bus_Panda

Hi, something is wrong with the model! The Mickey Mouse stands, right and left, print without any problems. However, when I print the middle part, it breaks every time with exactly 9 minutes remaining. It wants to change the filament, during which the hotend cools down and clogs! Only cleaning in maintenance mode at 250 degrees fixes the problem and I can restart the print. But as I said, with 9 minutes left, another error. Please check what the cause might be

The designer has replied

Show original

@killians82

Sorry that there has been an issue. That seems like a possible slicer issue though, not a model issue. I have printed this model around 100 times and have not had that issue. I did not include any filament changes in the model I posted. I did have ironing on for the top layers on the side pieces, and that can clog a nozzle easily. I would suggest checking the slicer settings to be sure its not trying to switch filaments and maybe turn off ironing to see if that helps. I am not sure what else could be causing the issue.

@Bam_Bus_Panda

Replying to @killians82 :

Thanks for your timely feedback. So I looked at the slicer settings, smoothing is not enabled, and I can't see any suspicious values in the other settings. It's really strange why I have this problem with the webs. If you have any ideas which slicer setting could be the problem here, please let me know. Sometimes there's just a bug. :o)

Show original

@killians82

Replying to @Bam_Bus_Panda :

What printer are you using? I can try uploading it again using your printer type.

@BossBabers

loved it perfect mother day gift

@ganluan

Print Profile

0.2mm layer, 3 walls, 10% infill

Came out great, takes a but more force than expected to put together

@ThePricesVices

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

amazing! My friend has way too many ears and no space, this fit the bill.

@AMCoffey

Print Profile

0.2mm layer, 3 walls, 10% infill

I was a little slow on putting the whole thing together, but once I figured it outcomes, it turned out really well! thanks!

@user_526110541

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

great print and great idea. it fits pins with ease. I have 5 ears on it. some of them are kind of bigger so I think it is a fair amount. thanks for the print!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.