AMS shelf extension for X1C P1S P2S D3P riser

THIS IS NOT A MODEL FOR A RISER BUT ADDONS FOR THE D3P RISER - SEE BELOW FOR MORE INFORMATION ON THE D3P RISER FOR THE P1S, X1C, P2S AND X2D SERIES. THANK YOU

MODEL

NEW: 2025-10-21 Added a revised version of the shelves.  These no longer require the AMS stop.

These are shelf extensions for use with the X1C D3P riser.  It will work with the following risers:

X1C D3P riser Link: https://cults3d.com/en/3d-model/tool/d3p-riser-for-bambu-lab-x1c

Alternate: https://www.crealitycloud.com/model-detail/d3p-riser-bambu-lab-x1c?source=22

P1S D3P riser Link: https://cults3d.com/en/3d-model/tool/d3p-riser-for-bambu-lab-p1s

Alternate: https://www.crealitycloud.com/model-detail/d3p-riser-bambu-lab-p1s?source=22

P2S D3P riser Link: https://cults3d.com/en/3d-model/tool/d3p-riser-for-bambu-lab-p2s

Alternate: https://www.crealitycloud.com/model-detail/d3p-riser-bambu-lab-p2s?source=22

The shelves allow the X1C D3P riser, the P1S D3P riser and the P2S D3P riser to hold two AMS 1 or AMS 2 units.  The shelves are removable and include pins to lock them into place.

3D PRINTING

PRINT SETTINGS

IMPORTANT I upload a print setting files for all my models. The print settings has the parts positioned for correct printing.

EACH BUILD PLATE HAS THE TYPE OF SUPPORT REQUIRED INDICATED ON THE BUILD PLATE DESCRIPTION (TREE AUTO, TREE MANUAL OR NO SUPPORT).

I strongly recommended you use my print setting file. If not, I will not be able to assist you if there is an issue when printing. From experience, many of the issues with printing my models are on account of users not using my print settings.

3D PRINT SETTINGS

I use the following settings and materials to print this model:

Infill % : 15% (no need for more)

Nozzle diameter: 0.4 mm

Layer height: 0.2 mm standard

Material: PETG is recommended. PLA will work providing you do not rest a dryer on the shelf or print high temp filament such as ABS and ASA. PLA may deform due to the heat of the dryer or due to heat of printing high temp filaments.  If you only will print PLA or PETG and will not use a dryer then PLA will work.