Shelfy - Now Infinitely Stackable! - Free 3D Print Model

Search models, users, collections, and posts

Mr Crempog

Household>Office

IP Report

Print Profile(3)

All

P1S

P1P

H2D Pro

H2S

P2S

H2C

A1 mini

X1 Carbon

X1E

H2D

X2D

A2L

v1.2 - 0.2mm layer, 2 walls, 15% infill, (100% infill posts)

Designer

8.2 h

3 plates

5.0(39)

Gridfinity Top Shelf

2.6 h

1 plate

5.0(1)

Bottom & Middle Gridfinity shelf pieces

7.1 h

2 plates

Open in Bambu Studio

Boost

1180

4157

1.6 k

749

Released

Bill of Materials

Bambu Filaments

Select all

PLA Basic

Rosewood (13204) / Filament with spool / 1 kg

PLA Wood

Description

Have you ever wanted a 16cm by 16cm tray to store your various gubbins? Well this is the storage solution for you. It is satisfyingly smooth and rounded and it fits as many gubbins as you would reasonably expect such a shelf to store.

As of v1.2, it is also Infinitely Stackable! You can have as many shelves as you want!

How to Print:

It prints well in Basic PLA. Wood PLA is also excellent. The minimum requirement is to print the Top and the Bottom piece. These then slot together without any sanding or suffering. If you want more than two levels, print a middle shelf. You can print as many middle shelves as you want, in order to increase the height. So far I'm up to 4 levels, and it's still a stable usable tower.

Two Level Shelf:

Time to Print: 5:01

Filament: 268g

Middle Shelf:

Time to Print: 3:12

Filament: 165g

(The middle shelf can be printed multiple times to get you as many layers as you want.)

About the Demo:

The tree shown in the images is this freestanding tree by Áron Pozsár. My wife and I use it to store our rings if we're not wearing them.

Two Levels

One is printed in Black Basic PLA, the other in Rosewood Wood PLA. The bottom tray is holding a full-size adult wallet and airpod pros.

Four Levels

This is printed in Black Basic PLA. It is my original v1 shelfy, with two additional middle layers. All shelfy shelves are compatible :)

Changelog

06/08/25 - v1.2 - Added a middle shelf. This is an optional extra layer, which can be stacked infinitely. It is compatible with your existing Shelfy if you already have one!

05/08/25 - v1.1 - @AnimeFanlove taught me that it is possible to add modifiers to the print profile in Bambu Studio, without having to remodel it. This allowed me to make the posts 100% infill, which should alleviate any fragility concerns and allow for significantly higher towers in the future.

How to Help:

I'm still new to designing and printing things, so if you can come up with a better way of printing it or a better design, please share it.

Future Ideas:

I'd like to expand this shelving universe and have different types of shelves that can be interconnected. Multiple levels, a flat top, drawers. I see a lot of potential in the design because it's really quite satisfying on my desk, and it makes me yearn for more.

Boost Me (for free)

If you enjoy storing gubbins in shelves, then help support the cause and enable future research and development to occur!

Comment & Rating (51)

@MrCrempog

I figured out how to make a middle shelf. You can now print as many levels as you want. I've ended up with 4 levels because of prototyping, and it's getting pretty tall now. It gives you a lot of storage space.

@MrCrempog

My wife wanted one in wood, so I used bambu wood PLA. Came out great! It did require some sanding though unlike with basic PLA, because the wood fibres make the posts more textured. It’s annoying because now I want a wood one…

@robertmarinescu

Good print but i have a question. Why is that line there like in my pics and also in yours??

The designer has replied

@MrCrempog

I’m not sure. It’s strange, the design doesn’t have anything to cause that. Maybe the slicer has done something weird?

@XxLuckyyxX

Print Profile

v1.2 - 0.2mm layer, 2 walls, 15% infill, (100% infill posts)

Thank you for the print!

@leontinker

Boosted

Print Profile

v1.2 - 0.2mm layer, 2 walls, 15% infill, (100% infill posts)

Printed fine

@MrCrempog

Thank you for the suggestion to add modifiers @AnimeFanlove, I've updated it with solid posts! :)

@AnimeFanlove

I'm so glad I could help. Pictures of my printed Shelfy will follow :-)

@leafless

Print Profile

v1.2 - 0.2mm layer, 2 walls, 15% infill, (100% infill posts)

I have this next to my bed too organize things and it works beautifully! Thanks for the print!

@AcmeArt

Boosted

printing now and looks amazing

@user_3964867374

looked good 4 standard cans fitted in but then the middle or roof won’t fit. I’m talking standard cans of beans, baby carrots, peas etc

@reverevfr800

Print Profile

v1.2 - 0.2mm layer, 2 walls, 15% infill, (100% infill posts)

great and well constructed superb

Show original

License

This user content is licensed under the MakerWorld Exclusive License.

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.