Frieren - Ubel
Print Profile(1)
Description
Boost Me (for free)
Hi! If you like what I do and have an unused Boost, it would go a long way towards me being able to produce more anime Hueforges more rapidly!
Chapter text has been removed.
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
The Model is 151.49x230mm in size
You may print at higher layer heights below the Base Thickness of 1mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23067mm
Filaments Used:
#eaecf5 PLA PolyLite Pro Cold White Transmission Distance: 0.5
#1d7c6a PLA Bambu Metal Oxide Green Transmission Distance: 0.4
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
This print uses 3 unique filaments
Swap Instructions:
Start with Cold White
At layer #24 (1.12mm) swap to Oxide Green
At layer #31 (1.4mm) swap to Black for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)