Optigrill Stand Feet
Print Profile(2)
Description
🔧 Model Name: OptiGrill Level Feet
📐 Goal:
The Tefal OptiGrill, due to its design, is slightly tilted forward – usually so that fat can drain to the front. However, for certain applications (e.g., grilling without leakage or better contact between both grill plates), the grill should stand **horizontally**. The design raises the front of the grill. **(Caution, it may happen that liquids no longer drain and/or run out the back)**
🧱 Number of Parts: 2 pieces (left and right foot)
📏 Dimensions :
- Height: approx. 40 mm
- Width (foot contact surface): 25 mm
- Depth: 25 mm
🔩 Design Features:
- Precisely fitting support surface for the original feet of the OptiGrill – recess into which the feet safely "sink"
- Slanted sidewall for stability and load distribution
- Stop edge small inner rim for fixing the grill in position
🖨️ 3D Printing Recommendation:
- Material: PLA+ or PETG (heat-resistant, stable)
- Infill: 15%
- Layer height: 0.28 mm
- Supports: Not necessary with preset orientation
- Print duration: approx. 30 minutes per foot
📌 Assembly:
- Slightly lift the grill
- Slide the 3D printed feet under the front support feet
- Ensure that the grill is now level (a spirit level can help)
- Optional: Fix with double-sided adhesive tape
Suitable for the OptiGrill Elite
Boost Me (for free)
Do you like my model? Then I would be happy about a boost
Membership
Interested in supporting me or interested in selling my models as a printed product in your shop? Then take a look at my licenses and make your choice.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)