Jujutsu Kaisen - Boogie-Woogie Aoi Todo
Print Profile(1)
Description
Boost Me (for free)
Hi! If you like what I do and have an unused Boost, it would go a long way towards me being able to produce more anime Hueforges more rapidly!
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm
The Model is 153.33x230mm in size
You may print at higher layer heights below the Min Depth of 1mm
The Max Depth is 2.6mm and the Actual Depth is 2mm
Filaments Used:
PLA BambuLab Basic Orange Transmission Distance: 7
PLA PolyTerra Lava Red Transmission Distance: 1
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA PolyLite Pro Cold White Transmission Distance: 0.5
PLA Polymaker Cream Transmission Distance: 2.7
PLA PolyTerra Peach Transmission Distance: 3.3
PLA Bambu Metal Oxide Green Transmission Distance: 0.4
PLA HueForge Dark Gray 2.3 Transmission Distance: 3
This print uses 8 unique filaments
Swap Instructions:
Start with Orange
At layer #22 (1.08mm) swap to Lava Red
At layer #25 (1.2mm) swap to Black
At layer #28 (1.32mm) swap to Cold White
At layer #31 (1.44mm) swap to Cream
At layer #35 (1.6mm) swap to Peach
At layer #40 (1.8mm) swap to Oxide Green
At layer #42 (1.88mm) swap to Dark Gray 2.3 for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)