Cyberpunk Pocket Knife

My first complete creation, from concept to model to final print test. I hope you enjoy it.

Issues I encountered during the design and printing process:

1.To achieve a flawless surface, I printed the three main knife parts upright, positioning supports in inconspicuous areas. If you have a superior arrangement, feel free to upload it to the profile.

2.The gold metallic filament felt somewhat brittle. I experienced breakage during assembly; I suggest increasing wall thickness and infill density.

3.I recommend increasing overall infill for added weight and a more substantial feel in the hand. My current configuration feels a bit light.

4.Four screws are used: one M3-10 self-tapping screw, one M3-20 screw, and two M3-14 screws. https://tianzhuowujin.tmall.com/shop/view_shop.htm?spm=tbpc.boughtlist.order_shopname.1.35c22e8dGSpMS8&user_number_id=2206461487758 I sourced them from this vendor; I haven't tested other sellers, but they should be similar.

5.I purchased water decals on Pinduoduo to add some embellishments, which significantly enhanced the appearance.

6.Consider painting the blade area with metallic paint.

7.I have printed this using a P1S and H2D.