Tristar KB-7540 Cooler Floor Riser
Print Profile(1)
Description
In our cooler Tristar KB-7540 we have a problem with condensation being build up in the bottom of the cooler.
Because of this, the contents get wet and soggy.
For this reason I designed an raised floor for our cooler! This way the contents stay dry.
All while you can still use the dividers!
The dimensions are a little bit smaller in comparison to the inside of the cooler.
This is done on purpose so the moisture can drip along the sidewalls to the bottom.
I've printed this with an 0.8mm nozzle being its an functional design. An 0.4mm will work just as great!
This is my first upload!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)