Lamp cup for pitched roofs - Free 3D Print Model

Search models, users, collections, and posts

Martin

Household>Decor

IP Report

Print Profile(1)

All

P1S

P1P

H2D

X1 Carbon

A1 mini

X1E

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 1 walls, 10% infill

Designer

2.7 h

1 plate

Open in Bambu Studio

Boost

Released

Bill of Materials

List other parts

strekkavlaster til kabel / standard wire strain relief x 1:

Description

Content has been automatically translated.

Show original

Lamp cup for pitched roofs. Created for this lamp: https://www.bohus.no/lamper/taklamper/pendel/rocks-taklampe-o19-2 The included cup is small and unsuitable for pitched roofs. This design accommodates roofs with a 30-degree pitch, providing ample space for a hook and cable from the ceiling suspension. The cup conceals a DCL cover in the ceiling.

I 3D-printed the cup using PETG HF for its heat resistance in high-ceiling applications.

The wire hole is designed to accommodate a standard cable strain relief for easy threading.

English:

Lamp cup for sloping ceilings. Made for this lamp: https://www.bohus.no/lamper/taklamper/pendel/rocks-taklampe-o19-2 The included cup is small and does not work for sloping ceilings. The one I made is for sloping ceilings of 30 degrees, has plenty of room for a hook and cable from the ceiling suspension. The cup covers a DCL lid in the ceiling so that it is hidden. I printed the cup in PETG HF so that it can withstand some heat high under the ceiling. The hole for the wire is made for a standard wire strain relief so that it can be threaded in.