10" 2U Rack Panel for 2 Fans, 80mm (PC-FAN)
Print Profile(1)
Bill of Materials
Description
Universal front panel with honeycomb mesh for a 10″ network enclosure.
With mounting options for two 80mm standard fans.
(When mounting, observe the airflow direction – there are always very small arrows on the sides of the fans!)
Specifically designed for my own 10″ enclosure:
https://makerworld.com/en/models/1601846-10-rack-enclosure-10-per-side-3-4-5u-high#profileId-1688552
Mounting instructions:
The OUTER sides of the panel are rounded.
The INNER side of the fan circles are rounded towards the fan.
The OUTER side is DOWN during printing, this provides a smoother surface.
Mountable on all sides of my enclosure (left, right, front, back, top, bottom)
Two height units = 88.8mm height
10″ format
Total outer width of the panel 254mm
Panel thickness: 3mm
Distance hole to hole: 235mm (10″ standard measurement)
Distance between the 3 holes in height: 15.88mm
Distance from the outer hole to the bottom/top edge: 6.35mm
PLA is possible, but I recommend PETG, preferably PETG-HF or PETG-CF
The print profile is set for PETG-HF.
Can be printed with the same settings using PLA or regular PETG, simply change the filament, leave the settings!
Clean the print bed thoroughly!
Printed by me on X1C and H2E
Boost Me (for free)
Do you like my rack gear?
A boost would be nice :-)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)