The one ring - The Lord of the Rings

The one ring, need I say more?

Hang on the wall or just put it on a table. The ring is a whole 160mm in diameter!

I printed with Bambu PLA silk - Gold.

Mt doom stand! 

For v2 there is now a mt doom stand (works for v1 also)! Print in translucent petg if you want it to shine. I have animated my new mega sized ring.

Mega sized ring: https://makerworld.com/en/models/533264#profileId-450094

Comparison:

Current version 2.0 - Now better shine!

Warning, the new back plate is much more secured when inserted. Make sure led is installed before closing.

The assembly is easy, just take about 50cm led strip and put it in the ring, like this:

Or alternative slide it in above the internal “bride”, this way you can get two loops for more light.

Holder remix

If you want a stand take a look at this remix: https://makerworld.com/en/models/467240#profileId-376287

Revisions:

v 2.0

Total redesign of the inner space of the ring and the back plate. The led strip is now held in place which gives a more uniform shine. Slightly bigger radius on the top of the ring.

The back plate also snaps to the ring better, DON'T PUT ON UNTIL LED IS INSERTED.

v 1.1

• Added a optional back plate that snaps in place. Use the chord for hanging on wall, or drill a hole for a nail (or use bambu studio and add a hole)