Jewelry Box kumiko Design - Free 3D Print Model

Search models, users, collections, and posts

EMAY-DESIGN

Fashion>Jewelry

IP Report

Print Profile(2)

All

P1S

P1P

H2D

X1 Carbon

X1E

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

7.6 h

3 plates

4.8(11)

Big Jewelry Box - 0.2mm layer, 2 walls, 15% infill

Designer

11.7 h

4 plates

4.5(6)

Open in Bambu Studio

Boost

177

453

206

111

Released

Description

Jewelry box in Kumiko design with modern pattern

The insert compartment is placed inside the box.

It also serves as a second accent color to the exterior design.

I designed two versions - a small heigt and larger height variant.
The large box offers space for two compartments.
You can easily remove it to access the lower compartment. I've divided the compartments into different sections.

The lid has a round handle with which you can open the box.

Both boxes - small and large - can be stacked on top of each other.
This means you only need to print the lid once if you choose this combination.

All parts can be printed completely without support structures.

Boost Me (for free)

jewelry

jewelry accessory

jewelry accessory box

Comment & Rating (22)

@thebizzyb

Boosted

Print Profile

Big Jewelry Box - 0.2mm layer, 2 walls, 15% infill

love this! wish the lid had a bit bigger lip to grab because it does slide off easily. ether way- super cute, great size and great design!

(Edited)

@user_96209190

Good evening, How do you manage to get the full exterior.... I can't manage it after two 5-hour prints... thank you for your reply

Show original

@thebizzyb

Boosted

I just printed it from the file listed. no special settings. what kind of issue are you having?

@nabfars

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

looking great 👍

@user_96209190

Thank you for your model which I like very much However this is the second time I have printed the openwork part that encircles the compartments of the large model and many segments of the pattern come out incomplete or misaligned and break I haven't changed the parameters though How to solve this problem please thank you for your help

Show original

@Themule08

I have also found that this was an issue. I was using Silk and the second from the top had many issues, which obviously is not ideal since that is 5 hours into the printing.

@user_3761574232

Print Profile

0.2mm layer, 2 walls, 15% infill

I loved it! Easy and beautiful print

Show original

@312039_2940385

Print Profile

0.2mm layer, 2 walls, 15% infill

very good design, i did it in light wood color and red. It came out perfect!

@user_2125404865

Boosted

Works great and my mom loved it!

@user_2125404865

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Looks great printed out

@user_877876578

Print Profile

Big Jewelry Box - 0.2mm layer, 2 walls, 15% infill

A truly magnificent jewelry box. I have printed the large rendition, ingeniously incorporating the base component from the smaller version, thereby yielding a total of two sets of three compartments. Perhaps the profile for the larger box could be configured to immediately present both base sections as alternative options

Show original

@user_96209190

Print Profile

Big Jewelry Box - 0.2mm layer, 2 walls, 15% infill

Other Issues:After two printing attempts (5 hours each), the outer decoration does not come out well in PLA Silk: there are multiple misalignments and many segments of the pattern are not connected

Show original

@Shadow146

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.