Mira Woldo from KPop Demon Hunters - Free 3D Print Model

Search models, users, collections, and posts

PrintOliveIt

Props & Cosplays>Cosplay Weapons

IP Report

Print Profile(6)

All

A1 mini

P1P

H2D

X1 Carbon

P1S

X1E

H2D Pro

H2S

P2S

H2C

X2D

A2L

70% Scale 0.16mm layer, 3 walls, 10% infill

Designer

20.4 h

10 plates

4.9(56)

100% Scale 0.16mm layer, 3 walls, 10% infill

Designer

39.4 h

10 plates

5.0(40)

100% Scale Fully Printed 0.16mm layer, 3 walls

Designer

39.7 h

10 plates

4.9(8)

70% + Light Kit - 0.16mm layer, 3 walls, 10% infill

21.7 h

2 plates

4.5(6)

Click to see more

Open in Bambu Studio

Boost

1056

2550

249

176

2.6 k

1.2 k

Released

Bill of Materials

Bambu Filaments

Select all

Gold (13405) / Filament with spool / 1 kg

PLA Silk+

Teal (13612) / Filament with spool / 1 kg

PLA Translucent

List other parts

100% scale: 1 meter/yard long 1/2inch or 5/4cm wooden rod x 1:
70% scale: 0.8 meter/yard long 3/8inch or 1cm wooden dowel x 1:

Description

So sorry for the wait everyone, this one took a lot longer than I was expecting it to.

I love Huntr/x, and they're my new favorite K-pop band. I added a photo of a cross-section of the whole assembled glaive so hopefully that'll make sure everyone knows how to put it together. I had a few people have issue with tolerances on the pins of Rumi's sword with .25mm of clearance so I increased these to .4mm to hopefully fit a bit easier. The full length is roughly 182cm (72 inches) so it's quite large. Sorry for the rough photos, had to use a .5 zoom the get the whole thing in frame. Added a photo with a 24 inch by 16 inch flag for scale.

I added a 70% scale version with a 1cm hole that runs 0.8 meters through the whole handle. That's ~3/8" diameter in freedom units and ~29" long. Everything else is the same, just smaller.

I added a full scale version that just uses pieces that can be printed so no wooden dowel is needed if someone doesn't have access to one

Important:

I added a hole through the handle for either a ½ inch (1.27cm) or 5/4 cm (.49 inch) diameter by 1 yard or 1 meter (preferred) long wooden rod. The diameter internally is 1.325cm, but I wanted to try to account for any inconsistencies in the wood so if a different sized rod fits tighter then that'll be better structurally.

If you'd like to see anything else or have any issues with the model, comment or DM and I'll do my best to get back to you.

Also, to be in the exclusive model program I had to change the license from Creative Commons (4.0 International License) to Standard Digital File, but if anyone needs that changed for whatever reason just DM and I'll figure that out.

If you'd like to see anything else or have any issues with the model, comment or DM and I'll do my best to get back to you.

Documentation (1)

Assembly Guide (1)

Mira Woldo Assembly Guide.pdf

Comment & Rating (249)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.