Hueforge Pablo Escobar

Project: Pablo Escobar.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 141x211.5mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 1.76mm and the Actual Thickness is 1.68mm

Filaments Used:
    #ffffff PLA Winkle PLA HD Blanco Glaciar  Transmission Distance: 2
    #a9b1b0 PLA Jessie Premium Gun Metal Grey  Transmission Distance: 5
    #576d81 PLA Jayo PLA Gray  Transmission Distance: 4
    #000000 PLA Generic PLA Black  Transmission Distance: 1.7

This print uses 4 unique filaments

Swap Instructions:
    Start with Blanco Glaciar
    At layer #8 (0.72mm) swap to Gun Metal Grey
    At layer #11 (0.96mm) swap to Gray
    At layer #16 (1.36mm) swap to Black for the rest.

---------------------------------------

You can find my HUEFORGE models here: https://makerworld.com/es/collections/5516891-hueforge

The final result will depend on the filament used and its TD. Please adjust the layers in Bambu Studio if your filament has a very different TD for a better result.

---------------------------------------

You can find my PUZZLE models here: https://makerworld.com/collections/6089094

----------------------------------------

You can find my "I LOVE" style skyline plates models of different cities here: https://makerworld.com/@luckyfer/collections/5582296-skyline

The size is 150mm base x 50mm height. If you modify the dimensions in the slicer, I recommend changing the values of the X/Y axes, but keeping the dimensions of the Z axis.

I hope you like the result.

------------------------------------------

You can find my keychain models here: https://makerworld.com/es/collections/5572814-llaveros

Thanks for your “likes/boosts”. :)