Blood In Blood Out Hueforge - Free 3D Print Model

Search models, users, collections, and posts

Estiv

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

P1P

H2D

X1E

X1 Carbon

P1S

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.08mm layer, 2 walls, 100% infill

Designer

3.7 h

1 plate

5.0(3)

Open in Bambu Studio

Boost

Released

Bill of Materials

Bambu Filaments

Select all

Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.33x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA BambuLab Matte Charcoal Transmission Distance: 0.6
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA Bambu Bone White (Manual Transmission Distance: 3
    PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
    Start with Charcoal
    At layer #8 (0.72mm) swap to Red
    At layer #16 (1.36mm) swap to Bone White (Manual

Border Only Colors from here until the end.
At layer #21 (1.76mm) swap to Ivory White for the rest.

Comment & Rating (5)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.