Abarth DRL Delete

This is a printable Abarth 500 DRL delete.

Use 100% infill and print out of PETG, ASA, ABS

I used a mix of hot glue, super glue and black high temp silicone to secure the insert. I did shave away some plastic on the inside so it will sit more flush.

Mirror Object to get the left hand side insert.

To avoid error codes coming up, insert a 5 watt 10 or 5 ohm resistor in the original socket and seal with electrical tape. It will get hot to the touch so make sure it is in a high airflow area to keep heat down.