Search models, users, collections, and posts
Logitech C525 Piranha Plant shell replacement
IP Report
Print Profile(1)
4 Colors with AMS & X1C, 0.2mm layer, 2 walls, 15% infill
Designer
21.2 h
8 plates
Open in Bambu Studio
Boost
5
6
0
0
7
0
Released
Bill of Materials
Description
This is a new shell for the Logitech HD Webcam C525 made to resemble a Piranha Plant.
This is my first published model so the print profile might not be the best, but feel free to improve on it.
To assemble, first you have to desolder the cable from the camera board, slide the cable through the pot and the camera housing.
Then you can resolder the cable to the board, screw it into the threaded inserts, and put the lid on.
Slide the housing into the head, then insert the stem in the back of the housing (careful of the cable, I had to tug on it a bit while inserting the stem)
Then route the cable through the stem, slide it in the pot and finally, attach the leaves.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)