Zoro One Piece TCG Deckbox

"When the world shoves you around, you just gotta stand up and shove back. It's not like somebody's gonna save you if you start babbling excuses." 

Roronoa Zoro, the Strawhats first mate, is making his appearance! Right in time just before OP12!
Red Leader Zoro was already a great leader but the new OP12 green leader is extremely fun to play!

These deckboxes are made for:
-UltraPro magnetic 23pt or 35pt hard card case in front (I'd advice using a black border if you copy the use of colors I did)
- Use of full One Piece deck + DON!! cards, both double sleeved, whether it's with inner or outer sleeves.
- An extra hole for smaller dice or tokens in the main deck area on the bottom.

So, I included both the STL of the lid and the deckbox with their respective user presets saved in the .3mf file.
Those user presets worked the best result for me, but if you have the bambulab support material or use PETG for support top interface it'll work far better with less of a hassle to clear the support away from the lid.

Settings:

On the deckbox preset there is topmost surface ironing, with the preset added to it, whereas the lid preset has different settings turned on and topmost surfaces as well. 
KEEP IN MIND that those presets are with S- PLA+, they might differ for Bambulab or other materials, so you might have to adjust those accordingly! 
I used S- PLA+ Green and PLA+ Black
Keep in mind that the tolerances are pretty spot-on, so you might have to slide it a few times before it slides smoothly! 

Printed with 0.2 layer height for the deckbox.
3 walls, 10% gyroid infill.
Printed with 0.12 layer height for the sliding lid.
Again, 3 walls and 10% gyroid infill.

Ironing settings that I used for PLA+ from S-:
Ironing speed 60mms
Ironing flow 38%
Ironing line spacing 0.11mm
Ironing inset on 0.21mm