Alfa Romeo 147 Keychain (working wheels)

If you enjoyed this model, remember to like, follow, and support my work with a nice 

If you're interested in using my models, several membership plans are available, even if you just want to buy me a coffee to show appreciation for my work :D

If you have any requests, don't hesitate to ask in the comments or personal messages!

For anything, don't hesitate to contact me; every request will be fulfilled promptly!

A request came from one of you, and I produced it!

Today I present the Alfa Romeo 147, another Italian pride used for many years by the national police forces.

The wheels are perfectly functional; be careful when removing the supports; I always recommend fine-tipped tweezers and a lot of patience.

It can be easily printed using AMS multicolor and a 0.4 noozle.

If you've already requested your model, don't worry, you'll be satisfied; it's a matter of time (unfortunately).

In the meantime, remember to follow my profile and to

Every model is PIP; the wheels are actually working.

I used AMS to achieve optimal multicolor results.

The model requires no assembly; you just need to carefully remove the tree supports already set in the print profile.

Better results can be achieved using the 0.2 mm printhead, at the expense of increased print times.

It's recommended NOT to change the print profile settings to avoid having problems with the final result.

I invite you to use tweezers and small pliers to remove the supports.

In more recent models, I've used smaller tolerances for the wheel alignment, to ensure a higher level of detail and fewer supports to remove in that area.

For this reason, it's necessary to "break in" the car once the supports have been removed (trying a couple of times) :D