JMiko

cover

20250718_223531.jpg

20250718_223557.jpg

20250718_223600.jpg

20250718_225826.jpg

20250718_230121.jpg

20250720_201653.jpg

20250721_203909.jpg

20250721_203915.jpg

plate_1.png

Screenshot 2025-07-21 014004.png

Write special settings or other information of this print profile, for example: • 0.2mm layer height • Print without support; • Colourised with white or wooden; • Improved strength by wallx4, infill density from 75% up to 100%. (If the infill is 100% there is no need to increase the strength.)

0.2mm layer, (4 walls, 75% infill / 2 walls, 100% infill )

Nuts and bolts you might need if you own a Wing Chun wooden dummy to hold the arms to the dummy&#39;s torso. It is highly recommended to set a 75% or higher infill and ABS filament, but you can also use other filaments such as PLA/PETG or others, except flexible materials.

Wing Chun wooden dummy screw and nut

ASIA

Print Profile(1)

Bill of Materials

Description

Comment & Rating (0)

License

Related Models